Bobst SP 76 E 1996

The machine was selected and carefully inspected by our engineers prior to purchase. Subsequently, it underwent a rigorous overhaul process, based on a well-established working protocol. This process involves disassembly in our specialized workshop, thorough cleaning, repainting of components and units, accurate reassembly, and the overhaul or replacement of all non-conforming or damaged parts and mechanisms according to our long and established experience. Each component is adjusted with centesimal precision to ensure compliance with original factory parameters. Finally, the machine is reassembled and subjected to thorough functionality tests and inspections for the best result according to our high quality standards.

MACHINE SPECIFICATION

Manufacturer	Bobst
Model	SP 76 E
Type	Die Cutting/fustellatrici

TECHNICAL DATA

Max sheet size	560 x 760
Min sheet size	260 x 300
Material Thickness	Paper 80 – 90 g/m² Corrugate 1.8mm (max.) Carton 600 g/m² (max.)

Accessories

Machine
- B-1 ELEVATED MACHINE Machine elevated 400 mm, included elevation of the steps
- Gripper bars
- Centerline system for quick job changeover
- Adjustable centering at the stripping and at the delivery
- Air conditioning for the electrical cabinet
- Electronic device for sheet travel control
- Main motor with frequency variator
- B-7 PLATFORM
- Platform covered with non-slip aluminum sheet with safety barrier
- C.U.B.E. (Control Unit Bobst Electronic) for machine operation
Feeder
- C-4 NON-STOP FEEDER MANUAL DEVICE
- Suction unit with multiple adjusting
- Pile rear guide (OS and OOS sides)
- Adjustable table feeder
- Pile-tray with handle allowing manual lateral correction of the pile during production
- Adjustable lateral blowers with Centerline references
- Safety system for lowering the pile try
Introduction table
- 1 Transport belt. With lateral guidance
- 4 front lays, adjustable in pairs with front register control
- 1 Sheet-hold down device (guiding the sheets to front lays)
- 1 Upper transport equipment for paper, paperboard and corrugated board
- C-5 CONTROLLABLE SHEET ARRIVAL FOR PERFECT SYNCHRONIZATION OF SHEET ARRIVAL AND REDUCTION OF MACHINE STOPPAGES
- D-73 FEED BELT SLOW-DOWN DEVICE Ensures smooth arrival of sheets against the front registers
- Covered with an anti-static stainless steel plate
- 1 Double sheet detector
- Pull-lay operator side (OS) adjustable according to Centerline, with sheet control
Platin
- 1 Cutting plate (E-4)
- 1 Upper chase with quick locking: fixed bottom (E-3) Plate, thickness 2 mm and make-ready protection plate of syntetic material, 1 mm thickness
- Equipment centering and locking
- Locking of the chase against the upper beam
- Resocell: synthetic material supporting plate. Thickness 22.5 mm
- E-5 COMPENSATING PLATE. THICKNESS 4 MM. IN GROUND STEEL
- E-55 ADJUSTABLE SUPPORTING PLATE CENTERINGS (MICROMETRIC)
- Grippers re-opening device
- Measurement of the die-cutting force with strain gauge
Stripping Station
- 1 Upper Stripping Frame (F-2)
- F-21 1 UPPER STRIPPING EQUIPMENT REQUIRED TO CREATE A WASTE STRIPPING TOOL, INCLUDING CROSSBARS, CLAMPS, STRIPPER HOLDERS AND STRIPPING PINS OF 3, 5 AND 10 MM OF DIAMETER. 1 unit comes with the basic machine
- F-22 1 FASTENING EQUIPMENT FOR STRIPPING STATION . 1 unit comes with the basic machine
- F-31 1 UPPER PULL-OUT FRAME QUICK LOCK WITH ALL ITS TOOLS
- F-35 1 FASTENING EQUIPMENT FOR UPPER PULL-OUT FRAME QUICK LOCK DEVICE FOR STRIPPING (TO FIX STRIPPING TOOL TO THE UPPER PULL-OUT FRAME QUICK LOCK)
- 1 Central drawer frame (F-71)
- 1 Fastening equipment stripping table (F-75)
- 1 lower pull-out frame (F-8)
- 1 Lower stripping equipment (F-81) Equipment for waste stripping including crossbars, pins and supports
- F-81 1 LOWER STRIPPING EQUIPMENT. Equipment for waste stripping including crossbars, pins and supports. 1 unit comes with the basic machine
Delivery
- G-5 AUTOMATIC NON-STOP BELT : it is automatically introduced on delivery when the pile of sheets is finished
- Pneumatically controlled adjustable front joggers
- Adjustable rear and side joggers with Centerline marks
- Pile tray in delivery
- Braking Brush
Conformity to standards and security
- Emergency Stop
- Gripper bar chain locking device
- Operator safety devices
- Gripper Bar Chain Slip Clutch

Machine overview

Year	1996
Serial Number	057001101

Conditions Overview

“EXTRA” Accessories Overview

B-1 ELEVATED MACHINE Machine elevated 400 mm, included elevation of the steps
B-7 PLATFORM
Platform covered with non-slip aluminum sheet with safety barrier
C-4 NON-STOP FEEDER MANUAL DEVICE
C-5 CONTROLLABLE SHEET ARRIVAL FOR PERFECT SYNCHRONIZATION OF SHEET ARRIVAL AND REDUCTION OF MACHINE STOPPAGES
D-73 FEED BELT SLOW-DOWN DEVICE Ensures smooth arrival of sheets against the front registers
1 Upper chase with quick locking: fixed bottom (E-3) Plate, thickness 2 mm and make-ready protection plate of syntetic material, 1 mm thickness
E-5 COMPENSATING PLATE. THICKNESS 4 MM. IN GROUND STEEL
E-55 ADJUSTABLE SUPPORTING PLATE CENTERINGS (MICROMETRIC)
F-31 1 UPPER PULL-OUT FRAME QUICK LOCK WITH ALL ITS TOOLS
F-81 1 LOWER STRIPPING EQUIPMENT. Equipment for waste stripping including crossbars, pins and supports. 1 unit comes with the basic machine
G-5 AUTOMATIC NON-STOP BELT : it is automatically introduced on delivery when the pile of sheets is finished

Reference Overview

Reference	25036532
Visible	Sbm Rebuilding Center of Robecco sul Naviglio (MI)
Availability	Immediately

Any Questions?

Download
.pdf format

Get Price Quotation
require more infos

Used and Overhauled Post-Press machines for Packaging and Finishing industries

Purchase our BOBST HEIDELBERG POLAR STAHL Post-Press machines some of them overhauled and in visible in production in our workshop

Bobst SP 76 E 1996

MACHINE SPECIFICATION

TECHNICAL DATA

Accessories

Machine overview

Conditions Overview

“EXTRA” Accessories Overview

Reference Overview

Any Questions?

Contact Us

Newsletter

Utility

Machines

Follow Us