Bobst Domino 145 Matic 1988

Accessories: Automatic bottom , All motorized transports , 4 corners min. 80 x 120 cm. (depends on kind of flaps) , Straight line boxes , Pneumatic carpet in delivery , No. 3 side joggers in delivery , No. 2 Mactron motorized guns glue system

No of Copies:

Bobst MISTRAL 110 A2 CS 2005

Accessories: FEEDER : total lenght 1320 mm , 8 Infeed conveyors with 30 mm belts, with 4 built-in mechanical vibrators , 1 Thickness gauge. With lateral and longitudinal adjustment and upper introduction rollers , 1 Additional thickness gauge. With lateral and longitudinal adjustment and upper introduction rollers , 2 Side lays in two parts. With right gauge equipped with a digital position indicator. Asymmetrical and adjustable longitudinally. Maximum height of the stack of die cut: 350 mm , 1 Gear-motor. Controlled by a frequency converter for feeding the infeed belts and switching on or off , 1 Series of adjustable rear guides mounted on a longitudinally adjustable carriage with pneumatic closure , 1 Lower right transporter. With 25 mm belts and 1 obliquely adjustable upper transport for perfect alignment of the die cuts , 1 Left Pre breaker positioned at 90° , Total lenght 2.300 mm , Lower left conveyor with 43 mm belt. With digital position indicator

No of Copies:

Bobst NOVACUT 106E 2015

Accessories: Pile tray wit handle allowing manul lateral correction of the pile during production , Pile lifting controlled by pressfoot , Real pile guides (OS and OOS) , Synchronization device timing the sheet arrival against the front lays when the machine is at a standstill , Side blowers adjustable with Centerline marks , Suction unit , Safety system for lowering the pile tray , Measurement of the cutting force with strain gauge on platen , Feed table covered with an anti-static stainless steel plate , Feed table inlet equipped with lateral ramps , Feed table with 4 front lays, adjustable in pairs with front register control

No of Copies: 31

Bobst PHARMA 36 1973

Accessories:

No of Copies:

Bobst SP 102 BMA 1990

Accessories: Computer touch screen for forwarding band control; temperature control , Non-stop on feeder , Pull lay operator side , No. 3 shafts for pushing forward the bands , Evaquation device for metal band with brush system , Standard equipment for controlling no. 6 bands , Pivoting joggers forsheet control , Honeycomb chase and plate 2,3 mm and 3 mm , Band brake detection (16 bands) , Automatic Non-stop with carpet in delivery , 7.500 speed/h

No of Copies:

Bobst SP 104 E 1998

Accessories: CUBE control system , Centre Line , No. 2 CUBE control system (One to the Stripping unit and one to the feeder unit) , Automatic Universal feeder with Non-stop facility , Standard Feeder with all its equipment , Pull lay operator side , Push lay opposite operator side , Non-stop on feeder with swords , Automatic lateral pile adjusting , Cutting plate with micrometric adjustment for 1 mm thin plates , 1 lower stripping frame with all its standard equipment

No of Copies:

Bobst SP 104 ER 1999

Accessories: CUBE control system , Centre Line , Automatic Universal feeder with non stop facility , Adjustable feed table with complement of infeed table furniture , No. 1 fast female tightening , Upper pull-out frame quick lock for stripping , Upper pull-out frame quick lock for blanking , Elevated 410 mm , Thin plate with micro metric adjustment , Tools for loading and transporting , No. 1 universal frame

No of Copies: 62000

Bobst SP 126 BMA 1990

Accessories: Non-stop feeder , 2 x Foil Pulls , 16 heating zones , Hot-Gold Foil System , No. 1 honeycomb , Non-stop delivery , Speed 5.000 s/h , Cutting power 500 TON , Pile height Feeder max 1400 mm Delivery max 1100 mm , Paper 80/90 g/m2 - Corrugate 4 mm , Size min 350x500 mm / max 920x1260 mm

No of Copies:

Bobst SP 126 BMA 1992

Accessories: Non-stop feeder , 2 x Foil Pulls , Dwell System for stopping the machine in pressure , Table for band preparation , 16 heating zones , Hot-Gold Foil System , No. 1 honeycomb , Non-stop delivery , Elevated 350 mm , Temperature from 50º to 160º , All books, Manuals and Tools

No of Copies:

Bobst SP 126 BMA 1992

Accessories: Retrofit computer and software SP 126 BMA FoilMaster 2024 , Computer touch screen for forwarding band control; temperature control , Non-stop feeder , Pull lay operator side , 16 heating zones , Hot-Gold Foil System , No. 3 shafts for pushing forward the bands , No. 1 honeycomb , Non-stop delivery with belt convey , Speed 5.000 s/h , Pile height Feeder max 1400 mm Delivery max 1100 mm

No of Copies:

Bobst SP 130 ER 1985

Accessories: Pressure gauge and limiter , Feed table with front register control , Feed table with pull lay operator side , Pile feeder with automatic lateral moving , Non-stop on feeder with swords , Feed table with transport equipment for paper and solid board from 90 to 1000 g / m2 , Feed table with pull lay operator opposite side , Die cutting plate 5 mm , Micrometric adjusting system , 1 die-cutting upper stripping frame , Universal lower tool for blanket

No of Copies: 73000

Bobst SP 130 ER 1987

Accessories: Centerline , Pull lay operator side , All books, Manuals and Tools , Elevated 350 mm

No of Copies:

Bobst SP 130 ER 1989

Accessories: Centerline , Pull lay operator side , Motorized suction head unit , Pile feeder with automatic lateral moving , Non-stop on feeder with swords , Micrometric centering of the cutting sheet , All books, Manuals and Tools , Elevated 350 mm

No of Copies: 58718

Bobst SP 142 E 1998

Accessories: Centerline , Non-stop on feeder with swords , Motorized head feeder , Automatic shift for the platform , Pull lay operator side , Push lay opposite operator side , Universal feeder , 1 central stripping quick lock , 1 die chase closed bottom , Upper pull-out frame for stripping with 3-point locking complete with all its standard equipment , 1 lower stripping frame with all its standard equipment with 3 points

No of Copies:

Bobst SP 142 E 1981

Accessories: Centerline , Motorized head feeder , Automatic Universal feeder with big tanks , Automatic shift for the platform , Non-stop on feeder with swords , Push lay operator side , Push lay opposite operator side , Receiving pull lay of the push lay operator side , Guide belt device on feeder table , 1 central stripping quick lock , Upper pull-out frame quick lock for stripping

No of Copies:

Bobst SP 142 E 1986

Accessories: Centre Line , Automatic Universal feeder with big tanks , Automatic shift for the platform , Motorized head feeder , Non-stop on feeder with swords , Push lay opposite operator side , Pull lay operator side , Receiving pull lay of the push lay operator side , 1 central stripping quick lock , 1 GRID die-cutting upper stripping frame with all its standard equipment , Non-stop delivery with belt convey

No of Copies: 76215

Bobst SP 142 ER 1988

Accessories: Pull lay operator side , Universal Feeder with big tanks for corrugate , Motorized suction head unit , Pile feeder with automatic lateral moving , Pushing lay for corrugate , Non-stop on feeder with swords , Extraction and Exposure split-up unit , Universal lower tool for blanket , Micrometric centering of the cutting sheet , Centerline , 3 points on lock system on ejection unit

No of Copies: 106000

Bobst SP 1420 E 1974

Accessories: Square type feeder head , Push lay opposite operator side , Pull lay operator side with double bearing kit for microwave , Non-stop delivery with belt convey , Elevated 350 mm

No of Copies:

Bobst SP 1420 E 1971

Accessories: Pull lay operator side , Push lay opposite operator side , 1 GRID die-cutting upper stripping frame , Non-stop delivery with belt convey

No of Copies:

Bobst SP 1600-E 1979

Accessories: Pull lay , Thickness max. 4 mm , Machine elevated , Speed : 5000 sh/h

No of Copies:

Bobst SP 76 BM 1999

Accessories:

No of Copies:

Bobst SP 76 E 2000

Accessories: CUBE control system , Pull lay operator side , All books, electrical scheme, manual instruction books, spare parts books and standard tools , Upper and lower stripping equipment (pins, bars, tools, etc.) , Stripping Pre make ready table , 1 die-cutting upper stripping frame with Quick Lock , Cutting plate with micrometric adjustment for 1 mm thin plates , Centerline System for Quick Job Changeovers , Non-stop delivery with belt convey , 7.000 speed/h (depending on cardboard and type of iob feature) , Machine elevated

No of Copies: 241

Bobst SP EVOLINE 102-E 2002

Accessories: CUBE control system , Pull lay operator side , Standard Feeder with all its equipment , Non-stop device on feeder , 1 die-cutting upper stripping frame , Diecutting chase (fixed bottom plate) , Micrometric system with compensation plate 3 mm and 1 mm small sheet metal , Centerline system for quick job changeover , 1 lower stripping frame with all its standard equipment , Quick fastening female , Cutting force 250 TON

No of Copies: 24

Bobst SPERIA 106 E 2004

Accessories: Centerline system for quick job changeover , CUBE control system , Antistatic bars for synthetic materials , Pull lay operator side , Pull lay operator opposite side , Slip at the feeder to avoid digging on the floor , Cutting plate with micrometric adjustment for 1 mm thin plates , Outside table for the preparation of the stripping unit , 1 upper pull-out frame quick lock , 1 Die-cutting chase quick lock , 1 central stripping quick lock

No of Copies: 8169

Bobst SPERIA 106 E 2005

Accessories: CUBE control system , Centerline system for quick job changeover , Feed table with 4 front lays, adjustable in pairs with front register control , Feed table with Pull guide (OS) adjustable according to Centerline marks, with side register control , Feed table with double sheet detector. Mechanical, integrated on pull guide (OS) , Feed table with sheet-hold down device (guiding the sheets to front lays) , Feed table with upper transport equipment for paper, paperboard and corrugated board , Feed table with transport belts (with lateral guidance and automatic tensionning system) , Synchronization device timing the sheet arrival against the front lays when the machine is at a standstill , Pull lay operator side , Manual Non-Stop device (Height pile reduced by approximately 200 mm in non-stop mode)

No of Copies:

Bobst SPERIA 106 E 2007

Accessories: CUBE control system , Centerline system for quick job changeover , Synchronization device timing the sheet arrival against the front lays when the machine is at a standstill , Non-stop on feeder , Pull lay operator side , 1 Die-cutting chase , Cutting plate with micrometric adjustment for 1 mm thin plates , Compensating plate. Thickness 4 mm. In ground steel , Supplementary frame , 1 central stripping quick lock , 1 upper pull-out frame quick lock

No of Copies: 12565