Used Press machines for Sale

Our inventory of used Heidelberg, Koenig and Bauer, Komori, Manroland, Mitsubishi presses some of them overhauled and in visible in production in our workshop

  2. Home
  3. Stock List
  4. Press
  2. Home
  3. Stock List
  4. Press
Bobst SP 104 E 1997 ref.25036495 Enlarge

Bobst SP 104 E 

The machine was selected and carefully inspected by our engineers prior to purchase.

MACHINE SPECIFICATION

ManufacturerBobst
ModelSP 104 E
TypeDie Cutting/fustellatrici

TECHNICAL DATA

Max sheet size1040 x 740
Min sheet size350 x 400

Accessories

  • Machine
    • Platform with safety barrier
    • Centerline system for quick job changeover
    • Electronic device for sheet travel control
    • Adjustable centering at the stripping and at the delivery
    • Air conditioning for the electrical cabinet
    • Gripper bars
    • Bobst Electronic System for management of the machine
    • Main motor with frequency variator
    • F-9 PRE-SETTING TABLE : Adjustable. Allows the preparation of a second job during production, reducing machine makeready time and increasing the time available to run production. Requires: a series of supplementary stripping tools
  • Feeder
    • Pile-tray with handle allowing manual lateral correction of the pile during production
    • Pile height control at the front edge thanks to a photoelectric cell
    • Pile rear guide (OS and OOS sides)
    • Adjustable lateral blowers with Centerline references
    • Suction unit with multiple adjusting
    • Safety system for lowering the pile try
    • C-4 NON-STOP FEEDER MANUAL DEVICE
    • C-8 VERTICAL POSITIONING OF THE SUCTION UNIT. Eliminates manual interventions to compensate for the flatness of the pile shape
  • Introduction table
    • Covered with an anti-static stainless steel plate
    • 1 Inlet table feeder
    • 4 front lays, adjustable in pairs with front register control
    • 1 Pull-lay operator side (OS) adjustable according to Centerline, with sheet control
    • 1 Double sheet detector
    • Support plates at entry of platen station
    • 1 Sheet-hold down device (guiding the sheets to front lays)
    • 1 Upper frame with manual lifting device
    • 1 Upper transport equipment for paper, paperboard and corrugated board
    • 4 Transport belts. With lateral guidance
    • C-5 CONTROLLABLE SHEET ARRIVAL FOR PERFECT SYNCHRONIZATION OF SHEET ARRIVAL AND REDUCTION OF MACHINE STOPPAGES
  • Platin
    • Grippers re-opening device
    • Die-cutting device without band of gripper grip
    • Equipment centering and locking
    • Locking of the chase against the upper beam
    • Measurement of the die-cutting force with strain gauge
    • Resocell: synthetic material supporting plate. Thickness 22.5 mm
    • 1 Upper chase with quick locking: fixed bottom (E-3) Plate, thickness 2 mm and make-ready protection plate of syntetic material, 1 mm thickness
    • E-5 COMPENSATION PLATE 4 mm thickness. it's useful for thin plate for repetetive work
    • E 55 ADJUSTABLE SUPPORTING PLATE CENTERINGS : micromeric screws allow fine adjustment of counters mounted on the cutting plate with respect to the die (+/- 0,9 mm lengthwise and crosswise.
  • Stripping Station
    • 3 drawer frame system
    • 1 Upper Stripping Frame (F-2)
    • 1 Upper stripping equipment (F-21) required to create a waste stripping tool, including crossbars, clamps, stripper holders and stripping pins of 3, 5 and 10 mm of diameter
    • 1 Fastening equipment for stripping die (F-22)
    • 1 lower pull-out frame (F-8)
    • 1 Lower stripping equipment (F-81) Equipment for waste stripping including crossbars, pins and supports
    • F-31 1 UPPER PULL-OUT FRAME QUICK LOCK. It reduces stripping tool assembly times; the quick-closing device allows the tool to be changed in the machine)
    • F-72 1 CENTRAL PULL-OUT FRAME QUICK LOCK
  • Delivery
    • Pile tray in delivery
    • Adjustable rear and side joggers with Centerline marks
    • 1 Braking brush
    • Pneumatically controlled adjustable front joggers
    • G-5 AUTOMATIC NON-STOP ON DELIVERY
  • Conformity to standards and security
    • Operator safety devices
    • Gripper Bar Chain Slip Clutch
    • Gripper bar chain locking device
    • Handling of the diecutting equipment
    • Emergency Stops

Machine overview

Year1997
Serial Number057802905
N.of working hours38460

“EXTRA” Accessories Overview

  • F-9 PRE-SETTING TABLE : Adjustable. Allows the preparation of a second job during production, reducing machine makeready time and increasing the time available to run production. Requires: a series of supplementary stripping tools
  • C-4 NON-STOP FEEDER MANUAL DEVICE
  • C-8 VERTICAL POSITIONING OF THE SUCTION UNIT. Eliminates manual interventions to compensate for the flatness of the pile shape
  • C-5 CONTROLLABLE SHEET ARRIVAL FOR PERFECT SYNCHRONIZATION OF SHEET ARRIVAL AND REDUCTION OF MACHINE STOPPAGES
  • E-5 COMPENSATION PLATE 4 mm thickness. it's useful for thin plate for repetetive work
  • E 55 ADJUSTABLE SUPPORTING PLATE CENTERINGS : micromeric screws allow fine adjustment of counters mounted on the cutting plate with respect to the die (+/- 0,9 mm lengthwise and crosswise.
  • F-31 1 UPPER PULL-OUT FRAME QUICK LOCK. It reduces stripping tool assembly times; the quick-closing device allows the tool to be changed in the machine)
  • F-72 1 CENTRAL PULL-OUT FRAME QUICK LOCK
  • G-5 AUTOMATIC NON-STOP ON DELIVERY

Reference Overview

Reference25036495
VisibleIn production
AvailabilityImmediately

Note:

Die Cutting test possible with your jobs by appointment

Any Questions?

Contact Us

Camporese Macchine Grafiche S.p.A
Via Del Santo, 243 - 35010 - Limena (Padova) Italy
+39 049 767166
+39 049 767629
info@camporese.it

Partita Iva IT03429400280
Euro 2.000.000,00 issued and fully paid-up share capital
Euro 5.495.000,00 net asset

Newsletter

Stay tuned to Camporese offers!

Newsletter Camporese

Utility

Machines

Follow Us