Bobst SP EVOLINE 102-E 2002

The machine was selected and carefully inspected by our engineers prior to purchase.

MACHINE SPECIFICATION

Manufacturer	Bobst
Model	SP EVOLINE 102-E
Type	Die Cutting/fustellatrici

TECHNICAL DATA

Max sheet size	720 x 1020
Min sheet size	400 x 350

Accessories

Machine
- Gripper bars
- Adjustable centering at the stripping and at the delivery
- Air conditioning for the electrical cabinet
- Centerline system for quick job changeover
- Electronic device for sheet travel control
- Main motor with frequency variator
- B-7 PLATFORM
- Platform covered with non-slip aluminum sheet with safety barrier
- Platform with safety barriers
- C.U.B.E. (Control Unit Bobst Electronic) for machine operation
Feeder
- Direct pallet loading
- C-4 NON-STOP FEEDER MANUAL DEVICE pile height around 300 mm on non stop mode
- Suction unit with multiple adjusting
- Pile rear guide (OS and OOS sides)
- Pile-tray with handle allowing manual lateral correction of the pile during production
- Safety system for lowering the pile try
- Adjustable table feeder
- Adjustable lateral blowers with Centerline references
Introduction table
- 4 Transport belts. With lateral guidance
- 4 front lays, adjustable in pairs with front register control
- 1 Sheet-hold down device (guiding the sheets to front lays)
- 1 Upper transport equipment for paper, paperboard and corrugated board
- CONTROLLABLE SHEET ARRIVAL FOR PERFECT SYNCHRONIZATION OF SHEET ARRIVAL AND REDUCTION OF MACHINE STOPPAGES
- Covered with an anti-static stainless steel plate
- 1 Double sheet detector
- 1 Pull-lay operator side (OS) adjustable according to Centerline, with sheet control
Platin
- 1 Cutting plate (E-4)
- 1 Upper chase with quick locking: fixed bottom (E-3) Plate, thickness 2 mm and make-ready protection plate of syntetic material, 1 mm thickness
- Equipment centering and locking
- Frame locking towards the upper block
- ie-cutting device without gripper margin
- Gripper reopening device
- ADJUSTABLE SUPPORTING PLATE CENTERINGS : micromeric screws allow fine adjustment of counters mounted on the cutting plate with respect to the die (+/- 0,9 mm lengthwise and crosswise.
- COMPENSATION PLATE 4 mm thickness. it's useful for thin plate for repetetive work
- Measurement of the die-cutting force with strain gauge
- Resocell: synthetic material supporting plate. Thickness 22.5 mm
Stripping Station
- Upper Stripping Frame (F-2)
- F-2 1 UPPER STRIPPING FRAME 1 unit comes with the basic machine
- F-21 1 UPPER STRIPPING EQUIPMENT REQUIRED TO CREATE A WASTE STRIPPING TOOL, INCLUDING CROSSBARS, CLAMPS, STRIPPER HOLDERS AND STRIPPING PINS OF 3, 5 AND 10 MM OF DIAMETER. 1 unit comes with the basic machine
- F-22 1 FASTENING EQUIPMENT FOR STRIPPING STATION DIE
- 1 Fastening equipment stripping table (F-75)
- F-31 1 UPPER PULL-OUT FRAME QUICK LOCK. It reduces stripping tool assembly times; the quick-closing device allows the tool to be changed in the machine)
- F-35 1 FASTENING EQUIPMENT FOR UPPER PULL-OUT FRAME QUICK LOCK DEVICE FOR STRIPPING (TO FIX STRIPPING TOOL TO THE UPPER PULL-OUT FRAME QUICK LOCK)
- F-76 1 FASTENING EQUIPMENT FOR STRIPPING TABLE ON CENTRAL PULL-OUT FRAME QUICK LOCK It allows to equip a stripping table to install it on central pull-out frame quick-lock
- CENTRAL PULL-OUT FRAME QUICK LOCK ON STRIPPING UNIT WITH ALL ITS TOOLS
- 1 lower pull-out frame (F-8)
- 1 Lower stripping equipment (F-81) Equipment for waste stripping including crossbars, pins and supports
- 2 drawer frames system
Delivery
- Pile tray in delivery
- Adjustable rear and side joggers with Centerline marks
- 1 Braking brush
- 1 Sheet shredder, ensuring good stacking
- Non-stop delivery with grill
Various
- Cutting force 250 TON
- Board quality processable : carta (min. 80g/m²); cartone (250/2000 g/m²); corrugato "E" e "B" (max 4 mm.)
- Cutting size: with frontal cut (max. 705 x 1020 mm.); without front cut (max. 720 x 1020 mm.)
- 7.500 speed/h (depending on cardboard and type of iob feature)
- Pile height at feeder : With non-stop system (max. 1100 mm.) - Without non-stop system (max. 1.400 mm.)
- Complete with aluminium bars, supports for noddles and noddles
- CE Machine
- All books, electrical scheme, manual instruction books, spare parts books and standard tools
- Adjustable gripper grip from: 9 - 17 mm

Machine overview

Year	2002
Serial Number	053900609
N.of Impressions	24 mio.
N.of working hours	14000

“EXTRA” Accessories Overview

Platform covered with non-slip aluminum sheet with safety barrier
Pile rear guide (OS and OOS sides)
CONTROLLABLE SHEET ARRIVAL FOR PERFECT SYNCHRONIZATION OF SHEET ARRIVAL AND REDUCTION OF MACHINE STOPPAGES
ADJUSTABLE SUPPORTING PLATE CENTERINGS : micromeric screws allow fine adjustment of counters mounted on the cutting plate with respect to the die (+/- 0,9 mm lengthwise and crosswise.
F-2 1 UPPER STRIPPING FRAME 1 unit comes with the basic machine
F-31 1 UPPER PULL-OUT FRAME QUICK LOCK. It reduces stripping tool assembly times; the quick-closing device allows the tool to be changed in the machine)
CENTRAL PULL-OUT FRAME QUICK LOCK ON STRIPPING UNIT WITH ALL ITS TOOLS
Non-stop delivery with grill

Reference Overview

Reference	24036417
Visible	Sbm Rebuilding Center of Robecco sul Naviglio (MI)
Availability	Immediately

Any Questions?

Download
.pdf format

Get Price Quotation
require more infos

Used Pre-Press machines for Sale

Find and explore our range of used pre-press machines for the printing industry

Bobst SP EVOLINE 102-E 2002

MACHINE SPECIFICATION

TECHNICAL DATA

Accessories

Machine overview

“EXTRA” Accessories Overview

Reference Overview

Any Questions?

Contact Us

Newsletter

Utility

Machines

Follow Us