Bobst SPERIA 106 E

The machine was selected and carefully inspected by our engineers prior to purchase.

MACHINE SPECIFICATION

Manufacturer	Bobst
Model	SPERIA 106 E
Type	Die Cutting/fustellatrici

TECHNICAL DATA

Max sheet size	1060 x 740
Min sheet size	400 x 350

Accessories

Machine
- Centerline system for quick job changeover
- Electronic device for sheet travel control
- Adjustable centering on delivery
- Control cabinet cooling unit
- C.U.B.E. (Control Unit Bobst Electronic) for machine operation
- Main motor with frequency variator
- B-7 PLATFORM
- B-28 INSTALLATION OF THE MACHINE WITHOUT EXCAVATION
- M-5 CHASE CHANGER : allows the change and preparation of the chase and the die cutting corresponding to the next job (Includes an increase in the surface of the platform)
Feeder
- Pile tray with handle allowing manual lateral correction on the pile during production
- Synchronization device timing the sheet arrival against the front lays when the machine is at a standstill
- Pile lifting controlled by Pressfoot
- Rear pile guide (OS and OOS sides)
- Side blowers adjustable with Centerline marks
- Suction unit
- Safety system for lowering the pile try
- C-4 NON-STOP FEEDER MANUAL DEVICE
Platin
- Grippers re-opening device (Platin)
- Cutting plate with micrometric adjustment for 1 mm thin plates
- Equipment centering and locking on platin
- Synthetic material supporting plate on platen (Thickness 23.5 mm (0,925")
- 1 Upper chase-fixed bottom (E-1)
- E-5 COMPENSATING PLATE. THICKNESS 4 MM. IN GROUND STEEL
- E-55 ADJUSTABLE SUPPORTING PLATE CENTERINGS
- E-3 1 UPPER CHASE QUICK-LOCK: FIXED BOTTOM PLATE, THICKNESS 2 MM, AND MAKE-READY PROTECTION PLATE MADE OF SYNTETHIC MATERIAL, THINCKNESS 1 MM.
- 1 Cutting plate (E-4)
Stripping Station
- Quick locking device of the central stripping board
- Motorized lifting of the upper frame
- F-2 1 Upper Stripping Frame
- F-31 UPPER PULL-OUT FRAME QUICK LOCK DEVICE FOR STRIPPING ((decreases extraction tool assembly times. the quick-closing device allows the tool to be changed in the machine)
- 1 Upper stripping equipment (F-21) required to create a waste stripping tool, including crossbars, clamps, stripper holders and stripping pins of 3, 5 and 10 mm of diameter
- Fastening equipment for stripping die (F-22)
- CENTRAL PULL-OUT FRAME QUICK LOCK ON STRIPPING UNIT WITH ALL ITS TOOLS
- 1 Adaption material for stripping board on the central frame (quick locking) (F-76)
- 1 lower pull-out frame (F-8)
- 1 Lower stripping equipment (F-81) Equipment for waste stripping including crossbars, pins and supports
- F-35 FASTENING EQUIPMENT FOR UPPER PULL-OUT FRAME QUICK LOCK DEVICE FOR STRIPPING (TO FIX STRIPPING TOOL TO THE UPPER PULL-OUT FRAME QUICK LOCK)
Delivery
- Adjustable rear and side joggers with Centerline marks in delivery
- G-5 AUTOMATIC NON-STOP BELT : it is automatically introduced on delivery when the pile of sheets is finished
Various
- Cutting force 260 TON
- 7.700 speed/h (depending on cardboard and type of iob feature)
- Board quality processable : carta (min. 80g/m²); cartone (250/2000 g/m²); corrugate* (3 - 4 mm.) ( * ) Carton acceptable warp : 4% of the widthwise sheet
- Compliant with European Directives for essential safety and health standards relating to design and construction and with American standards UL 508 and NFPA concerning industrial equipment
Tavolo di introduzione
- Covered with an anti-static stainless steel plate
- Transport belts (with lateral guidance and automatic tensionning system)
- 4 front lays, adjustable in pairs with front register control
- Pull-lay operator side (OS) adjustable according to Centerline, with sheet control
- Double sheet detector. Mechanical, integrated on pull guide (OS)
- Sheet-hold down device (guiding the sheets to front lays)
- Upper transport equipment for paper, paperboard and corrugated board
- C-5 SYNCHRONIZATION DEVICE TIMING THE SHEET ARRIVAL AGAINST THE FRONT LAYS WHEN THE MACHINE IS AT A STANDSTILL
- D-3 PUSH GUIDE (OOS opposite operator side)
- "Pull" guide (OS) adjustable according to Centerline marks, with side register control

Machine overview

Year	2005
Serial Number	053802101
N.of Impressions	110 mio.
N.of working hours	25593

“EXTRA” Accessories Overview

B-7 PLATFORM
B-28 INSTALLATION OF THE MACHINE WITHOUT EXCAVATION
M-5 CHASE CHANGER : allows the change and preparation of the chase and the die cutting corresponding to the next job (Includes an increase in the surface of the platform)
C-4 NON-STOP FEEDER MANUAL DEVICE
E-5 COMPENSATING PLATE. THICKNESS 4 MM. IN GROUND STEEL
E-55 ADJUSTABLE SUPPORTING PLATE CENTERINGS
E-3 1 UPPER CHASE QUICK-LOCK: FIXED BOTTOM PLATE, THICKNESS 2 MM, AND MAKE-READY PROTECTION PLATE MADE OF SYNTETHIC MATERIAL, THINCKNESS 1 MM.
F-31 UPPER PULL-OUT FRAME QUICK LOCK DEVICE FOR STRIPPING ((decreases extraction tool assembly times. the quick-closing device allows the tool to be changed in the machine)
CENTRAL PULL-OUT FRAME QUICK LOCK ON STRIPPING UNIT WITH ALL ITS TOOLS
F-35 FASTENING EQUIPMENT FOR UPPER PULL-OUT FRAME QUICK LOCK DEVICE FOR STRIPPING (TO FIX STRIPPING TOOL TO THE UPPER PULL-OUT FRAME QUICK LOCK)
G-5 AUTOMATIC NON-STOP BELT : it is automatically introduced on delivery when the pile of sheets is finished
C-5 SYNCHRONIZATION DEVICE TIMING THE SHEET ARRIVAL AGAINST THE FRONT LAYS WHEN THE MACHINE IS AT A STANDSTILL
D-3 PUSH GUIDE (OOS opposite operator side)

Reference Overview

Reference	24036406
Visible	Sbm Rebuilding Center of Robecco sul Naviglio (MI)
Availability	Immediately

Any Questions?

Download
.pdf format

Get Price Quotation
require more infos

Used Press machines for Sale

Our inventory of used Heidelberg, Koenig and Bauer, Komori, Manroland, Mitsubishi presses some of them overhauled and in visible in production in our workshop

Bobst SPERIA 106 E

MACHINE SPECIFICATION

TECHNICAL DATA

Accessories

Machine overview

“EXTRA” Accessories Overview

Reference Overview

Any Questions?

Contact Us

Newsletter

Utility

Machines

Follow Us